Qualastat Electronics, Inc.

Qualastat Electronics, Inc. supports industries that demand high reliability in hostile environments. The systems that our products are integrated into cannot afford down time. Whether it's an oil rig that costs tens-of-thousands of dollars per hour to operate or a missile defense system responsible for saving lives, our products are trusted by our customers to operate flawlessly.

Qualastat is AS9100D certified. Our operators are certified to IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies, and J-STD-001, Requirements for Soldered Electrical and Electornic Assemblies.

Cable Testing
Using The Cirris CH+

By using the Cirris CH+, Qualastat has the ability to test up to 5,376 points at voltages up to 1500 VDC and 1000 VAC. Tests include: continuity, insulation, dielectric, and capacitance. Using either a golden cable or through manual programming, Qualastat has the ability to save the test program for repeat business. In addition, test harness assemblies are catalogued and saved for the next time an order is placed.

Harness Testing
Using The Cirris Easy-Wire CR

Qualastat tests every point of a harness directly on the forming board. By connecting each forming board to the easy-wire CR, harnesses can be tested on the assembly floor by simply pulling up the required test program. Testing with this method enables Qualastat to keep costs down by having assemblers test product at their work station, without having to traffic them to QC.

IPC/WHMA-A-620

As military standards fell by the wayside throughout much of the '90s, industry found itself without a universal standard against which to measure quality. Recently, a new standard, the IPC/WHMA-A-620, has been published. Qualastat has been recognized by the WHMA (Wire Harness Manufacturers Association) organization for its support in the development of this document. Furthermore, Qualastat's President, Vernon Judy Sr., has been recognized by both IPC and WHMA for his leadership in this document's development. Vernon is considered to be an expert on this document has been asked by a number of trade organizations to present the IPC/WHMA-A-620. In addition to Vernon, Qualastat has Troy Agner on staff. Troy was an important member of the committee that developed the standard.